Wednesday 25 April 2012

Repairing Dents on a Car

There are few things that can ruin the looks of your car and a dent is one of them. Reporting the incident to the guarnatee enterprise will definitely increase the rates. Having a dented car is definitely not fun and repairing them at the local body shop can of course be very expensive. Someone else issue of travelling without communication is also gift when the repairing is being done. Luckily, there are some methods that can be tried at home that are not very high-priced and are fairly easy. Consequent the fairly uncomplicated Diy methods.

Spray Paint On Cars

Tools and Things Needed
- Plunger
- Rubber Hammer
- Air Duster
- Dry Ice
- Hairdryer
- Torch

Directions

Method 1:
First, use a plunger to suck out the dents. This recipe is an old and reliable. The plunger has to be located on the town of the dent and then pushed in, this is just similar recipe for a blocked toilet. This will often not work in the first exertion so continue. This singular recipe is good for smaller dents and those dents where it is somehow impossible to get behind. Any way there is no warrant in this recipe whether the paint will be saved. The plunger option is recommended if your funds is low for spending on this project.

Method 2:
Dry ice can be used, it is a pretty cheap and ready easily. Plainly place the block of ice on top of the dented area and the ice will moderately pull out the dent. The process has to be repeated until the dent ultimately vanishes. Make sure that you are wearing protective gear like hand gloves because this ice is perilous and can severely burn the skin. The paint will usually not get damaged by this method.

Method 3:
Tackle the dent using household items. Using a hair dryer is Someone else method, heat the dented area for about a limited and then quickly spray the whole area using an air duster. The hot and cold combination will generate a type if suction and the dent will pop out within a few minutes. There will be minimal damage to the paint job.

Method 4:
A hammer can also be used to bang the dent out. You would have to reach behind the dent. The metal gets stretched by denting so it is best for softening the metal before the hammer is used. The area will not look right if the metal is not softened. In case of a chrome surface, an acetylene torch can be used for eating the area. Don't make the metal very hot. When the area is heated the dent can be lightly bumped out from the other side. Once the dent is recovered, place a cloth that is soaked in ice water to help it cool down the surface. It is better to use a rubber mallet rather than using a metal hammer because it will have a diplomatic Consequent to the car.

Diy methods are usually more economical than sending a car to the professionals. Hopefully they will help to solve the problem.

Tips and Precautions
- Always wear protective gear like eye goggles, gloves and a breathing mask when using chemicals.
- Some dents consist of scratches and the paint needs to be recovered. If there is damage on the paint then conventional car sprayers can be used. These are of course ready in the store depending of the color of the car.

No comments:

Post a Comment